Showing posts with label motorcycle. Show all posts
Showing posts with label motorcycle. Show all posts

Wednesday, 13 May 2015

Back on track

As my left hand is healing nicely, I can now focus again on my scale modeling projects. In this post I am showing the progress on the Harley Davidson custom chopper project. As you know already, this is going to be scratch built, with only the rubber tires taken from a Revell 1:12 motorcycle kit.

As the central piece of any chopper is the engine, the first thing I want to clear from the table is making the engine parts. Luckily, one of my friend has just build a Prusa 3D printer and he was kind enough to do a test print for me. Since we're both beginners in this area, we tried to print the engine as one part. Unfortunately the results are not satisfactory, mainly due to parts orientation. So for the next test print we will take each part and print them separately. There are 8 main printable parts on the motor.




Below pictures show the first printed motor.






Eventually, the cylinder heads will be printed using a commercial printing service, as it would require a different technology like SLS to achieve the right quality.

Tuesday, 3 June 2014

Some updates

Due to a long business trip, the progress on the bike was slow. But since the last update I still managed to design the front brake caliper, headlight, handlebars and the fuel tank.

Thinking how I will make these parts, I suppose the tank can be made easier with modeling putty or even 3D printing, the headlight on the lathe (or use the plastic part from a Revell kit) and brake caliper again using 3D printing.

Still have to design the mounts for the fuel tank and the gas cap.









Wednesday, 23 April 2014

Chain drive design

It's time for the final drive design. For this project, I decided to use a roller chain instead of the "traditional" belt drive. I intend to use a 1/12 scale chain & sprockets kit from Top Studio, even though they are designed for Moto GP bike kits from Tamiya or Fujimi. But before ordering such a kit I need to design a sort of a mock chain and sprockets, just to assess the frame width and wheel/fender clearances.

After few days of gathering information and learning about chains mathematics (e.g. calculate the number of teeths, sprocket diameters), I finally managed to finalize the design and dimensions. I don't intend to have accurate sprocket ratio or pitch, just to have something to help getting the clearances right.

Just to give you an idea of the scale, here are the chain and sprockets data I came up with:
Pitch = 0.955 mm
Roller diameter = 0.5 mm
Roller width = 0.6 mm
Sprockets thickness = 0.5 mm
Driver sprocket outside diameter = 6 mm
Number of teeth on the transmission side sprocket = 18
Driven sprocket outside diameter = 18.843 mm
Number of teeth on the wheel side sprocket = 60

Of course these will change once I get the Top Studio chain kit, but it was a good learning exercise on how to design a chain and sprockets in Inventor. Plus that due to this exercise I discovered that the primary transmission plate has to be adjusted a bit to clear the chain. Also the oil tank's diameter had to be reduced from 13 mm to 12 mm, to clear the transmission plate. The rear fender will have a cut off on the left side, but I will not model that on the virtual model but do it directly on the fender part.

Later I will have to decide how to attach the sprocket on the transmission axle - I would like to be able to turn the rear wheel and both sprockets on the final/real scale model.

Here are some photos:








Wednesday, 16 April 2014

An introduction to the current project

The main project I am working currently is to design and build a 1/12 scale custom chopper motorcycle. I intend to build almost all the parts, with few exceptions being the tires, which are taken from a Revell motorcycle kit. The engine and gearbox will probably be 3D printed as is too intricate and complex to use conventional methods like milling. The 3D printed part will be used as a master pattern and they will be cast in resin. All the other parts will be made in metal, mainly brass and aluminum.

I have started this project approximately one year ago, working slowly on the design. Since it's an ambitious and complex project, I decided I will do the design in a CAD tool first and only then start building the physical parts. So I started learning various CAD tools and designing the bike in parallel. Actually the bike was the main motivator to learn the CAD tools as they are quite complex and have had no previous training in this domain.

Here are some photos of the current design